Call Now: (971) 342-8410Call Now
Hidden leaks are usually found by mapping moisture: thermal cameras show cool, wet areas behind drywall, and moisture meters confirm how far the water has spread. Once the source is found, a plumber repairs the pipe and we dry the damage. Catching a hidden leak early keeps it from turning into rot and mold.
Signs of a Hidden Leak in Your Lake Oswego Home
- Water bill higher than usual with no change in use
- Water meter moving when every tap is off
- Musty smell in a closet, cabinet or the lower level
- Bubbling paint, soft drywall or a stain that keeps growing
- Warped baseboards or flooring that lifts
- Sound of running water in a wall
- Damp insulation or wet soil in one area of the crawl space
Check Your Lake Oswego Home for a Leak: The Meter Test
- Turn off every faucet, appliance and irrigation system.
- Find your water meter (usually in a box near the curb).
- Note the reading or watch the small leak indicator dial.
- Wait 30 to 60 minutes without using any water.
- Check again. If the reading changed, you likely have a leak.
Where Leaks Hide in Lake Oswego Homes
| Location | Common cause | What you might notice |
|---|---|---|
| Crawl space supply lines | Freeze damage, old fittings | Musty smell, damp floors above |
| Behind showers and tubs | Failed valve or grout | Stain in the room next door or below |
| Under kitchen sinks | Loose supply or drain fittings | Swollen cabinet floor |
| Inside exterior walls | Frozen pipe, spigot line | Bubbling paint near outside walls |
| Ceilings under bathrooms | Toilet wax ring, drain leak | Stain below the bathroom |
| Irrigation and outdoor lines | Broken sprinkler line | Soggy yard, water near the foundation |
How We Find Leaks in Lake Oswego Homes
- Thermal imaging to spot cool, wet areas behind surfaces
- Pin and pinless moisture meters to map how far water has spread
- Hygrometers to measure humidity in rooms, wall cavities and crawl spaces
- Visual inspection of the crawl space, attic and fixtures
- Photos and notes of every finding for your plumber and records
After the leak is found, we dry the area. See structural drying.
What Our Lake Oswego Leak Detection Report Includes
| Item | Why it helps |
|---|---|
| Thermal images of wet areas | Shows exactly where water is behind surfaces |
| Moisture readings on a floor plan | Shows how far it spread |
| Likely source of the leak | Tells your plumber where to repair |
| Photos of the crawl space or attic | Shows hidden damage |
| Recommended next steps | Drying, removal or repair |
Lake Oswego Leak Detection FAQs
Do you fix the leak too?
We find the source and dry the damage. A plumber repairs the pipe, and we can coordinate with yours.
Will you have to cut open my walls?
Usually not to find the leak. Thermal imaging and meters work from the surface. If drywall is soaked or a pipe needs repair, a small opening may be needed.
Can a hidden leak cause mold?
Yes. Slow leaks feed mold for weeks before it shows. See mold remediation.
How do I find a leak in my crawl space?
Look for wet soil, dripping pipes or damp insulation in one area. We can inspect and map it for you. See crawl space water damage.
How long does leak detection take?
Most homes take about one to two hours, depending on size and how many areas show moisture.
Can you find a leak under a concrete slab?
We can often narrow it down with thermal imaging and moisture readings on the floor. A plumber with specialized equipment usually pinpoints and repairs slab leaks.
Suspect a Hidden Leak in Your Lake Oswego Home? Call Now
We'll find it, show you, and dry what it damaged.